Portland area service
Roofing Dumpster Rental in the Portland Metro
A flat-rate roll-off sized for tear-off shingles, felt paper and moss-damaged decking, delivered anywhere from North Portland to Hillsboro.
- Licensed & insured
- Same-day in Portland
- Flat-rate pricing
- All 9 area communities
Roofing Dumpster Rental across the Portland metro area
Roofing debris is deceptively heavy for its volume, which is exactly why roofing jobs are the fastest way to over-face a dumpster that was picked by eye instead of by weight. A single layer of asphalt composition shingles torn off a modest ranch house can run well past a ton once you add the old felt underlayment, flashing and whatever soft, moss-swollen decking comes up with it. Blue Rose Dumpster Rental Portland sizes roofing containers around tonnage, not just cubic yards, so crews working anywhere from a 1940s bungalow in Kenton to a new build in Happy Valley get a container that actually matches the tear-off, not a guess.
Because our yard sits on N Albina Ave near Swan Island, dispatch can reach roofing crews working the west side off US-26/Sunset Highway or the east side off I-205 without the container spending half the morning in traffic. That matters on a roofing job more than most, since a tear-off that sits open and exposed to Pacific Northwest rain for even a day adds weight, mess and risk of the felt paper blowing loose.
At a glance
What you get with roofing dumpster rental
- Sized by tonnage as well as cubic yards, so a heavy tear-off doesn't get stuck mid-job
- Low-profile roll-off design makes shoveling shingles off a tarp or chute manageable
- Flat-rate pricing built for the wet-season reality of moss-swollen, waterlogged tear-offs
- Delivery scheduled around your crew's tear-off day, not a generic weekly pickup window
Why roofing loads run heavier than they look
Composition shingles alone weigh roughly 200 to 300 pounds per square (a 10x10 foot section), and that number climbs fast on a multi-layer tear-off, which is common on older Portland-area homes that were re-roofed over an existing layer decades ago. Add saturated felt paper, rusted flashing and any rotted decking boards that come up with the shingles during a wet-season tear-off, and a roof that looked like a 20-yard job on paper can push into 30-yard territory once it's actually stripped. Tell our dispatcher the roof's square footage and roughly how many layers are coming off, and we'll size the container to the tonnage, not just the footprint.
The wet-season moss problem
From roughly October through April, steady Pacific Northwest rain keeps roofs damp enough for moss and algae to take hold, especially on north-facing slopes and roofs shaded by mature Douglas firs, which describes a large share of the tree canopy from Forest Park down through the West Hills and out into older Beaverton and Lake Oswego neighborhoods. Moss doesn't just discolor a roof, it holds moisture against the shingles and decking underneath, which accelerates rot and is one of the more common reasons a roofer ends up tearing off decking boards along with the shingles instead of a straightforward shingle-only job. Waterlogged moss and decking also weigh noticeably more than dry tear-off debris, which is another reason to size the container generously for any job scheduled during the wet months.
Keeping the tear-off contained
Placing the dumpster close to the drop zone, with a tarp or plywood chute running shingles straight off the roof edge, keeps loose nails and grit off the driveway or street and speeds up the tear-off day considerably. If the container has to sit in a public street or sidewalk rather than a driveway, factor in permit timing before the crew shows up. In Portland proper, a dumpster placed entirely on private property (driveway, curb apron or job site) does not require a permit; one that has to sit in the public right-of-way may need a temporary permit from the City of Portland, and our team can help walk you through that. Every other city and county in the service area sets its own right-of-way rules, so confirm with your local city or county office before the container is dropped in the street.
Suitability
Is roofing dumpster rental the right call?
The fastest way to get this right is to check the load against both lists before you book.
Good fits for this container
- Full tear-off and re-roof jobs, including multi-layer shingle removal
- Roof replacements uncovering rotted or moss-damaged decking
- Roofing contractors running back-to-back jobs across the metro
- Storm- or wind-damaged roof sections needing a fast strip-and-haul
Send these somewhere else
- Small patch or repair jobs generating only a few bundles of debris (a bagged pickup is cheaper)
- Loads mixed with wet paint, roofing tar buckets or other liquids and hazardous material
- Jobs where the debris needs to sit uncovered through a multi-week stretch of heavy rain
Roofing Dumpster Rental — the Portland-area specifics
Roofing crews working the Silicon Forest side of the metro, around Hillsboro and Beaverton's tech corridor near Nike and Tektronix, tend to be on newer roofs with simpler single-layer tear-offs. Head into the older neighborhoods closer to the yard, North Portland's Kenton area, St. Johns, or the older housing stock around Milwaukie and Oregon City, and it's common to find two or even three layers of shingles stacked up from past re-roofs, plus decking that's been quietly absorbing moisture under moss for years. We size the container either way and can usually get a roofing dumpster out to a job site the same day or next day, depending on the day's delivery route.
Talk to a real person
Need roofing dumpster rental in Portland?
Call (971) 754-2757, describe the job in a sentence, and you will get a flat price and a delivery window on the same call.
Mon–Sat 7:00am – 7:00pm
Answers
Roofing Dumpster Rental — your questions answered
What size dumpster do I need for a roof tear-off?
It depends on the roof's square footage and how many layers are coming off, not just the house size. A single-layer tear-off on an average single-family roof often fits a 20-yard container, while a multi-layer tear-off or one uncovering rotted decking can push into 30-yard territory. Call us with the roof size and layer count and we'll recommend a size based on weight, not just volume.
Can shingles go in with other construction debris?
Shingles alone are fine, and a mix of shingles, felt paper, flashing and rotted decking from the same tear-off is normal. What we can't take mixed in is wet paint, roofing tar in open buckets, or anything hazardous. Ask us if you're not sure about a specific item.
Does wet-season rain change how you price or size a roofing dumpster?
We don't change the flat rate because of weather, but we do recommend sizing a bit more generously for a tear-off scheduled during the rainy months, since waterlogged moss and decking weigh more than dry debris and can fill a container faster than expected.
Do I need a permit to place a roofing dumpster in Portland?
If the container sits entirely on private property, your driveway, curb apron or the job site itself, the City of Portland does not require a permit. If it has to sit in the street or on the sidewalk, a temporary right-of-way permit may be required, and our team can help you through that process. For any other city in our service area, we recommend calling that city or county's office directly to confirm local rules before the dumpster is placed in a public right-of-way.
Service area
Roofing Dumpster Rental across the Portland metro area
We run roll-off containers out of our 6425 N Albina Ave yard in Portland to all nine communities we cover — close-in Portland and Gresham on the Multnomah County side, Beaverton, Hillsboro and Tigard out in Washington County, and Lake Oswego, Milwaukie, Oregon City and Happy Valley across the river in Clackamas County. Portland and the closest towns are usually same-day; the farther edges of the service area are next-day. If your town is not listed, call anyway. We likely still get there.